| Manufacturer: | EnergySpeed |
| SKU: | KCR-H4-BX |
| MPN: | ES-H4-BX |
Description:
Our EnergySpeed Bi-Xenon Kits allow you to keep your high beams when adding HID Lights to cars with Dual Filament bulbs. Normally, in such cars, a Single Beam HID Kit will eliminate your high beam. With this kit, when power is applied to your high beams, a motor inside the Bi-Xenon Flex Bulb moves it to another position, simulating the effect of a dual filament halogen bulb. The motion is instant; No warm-up time!
Click Automotive light bulbs replacement guide to find the right bulb for your vehicle.HID Lights shine up to
300% as bright as stock bulbs, and last up to
5 times as long as stock bulbs! HID bulbs also produce less heat than halogen bulbs, so there is no need to worry about melting any of your stock housings or wiring. They also draw less power from your vehicle.
Our manufacturer was founded in 1993. They have been a leader in LED technology, and in 2002 they invested 100 Million in Xenon Technology from Germany. Since then, they have been a leading producer of HID and LED lighting.
Our HID kits are among the best and brightest available. All of our HID Conversion Kits include a Limited One-Year Warranty.
| Standard 35W Ballast Specifications |
| |
| Classification: | 12V/35W |
| Input voltage: | DC13.5V (or 9?16V DC) |
| Start-up current: | 6.5A |
| Stable input current? | 3.2A (Input 13.5 V DC) |
| Input Low voltage protection: | 7.0±0.5V DC |
| Input high voltage protection: | 16±0.5V DC |
| Output power: | 35±1W |
| Output frequency: | 250±10%Hz |
| Output voltage: | 85V AC |
| Output short circuit protection: | Automatically stop working within two seconds while open circuited |
| Output open circuit protection: | Started-up, Continuously |
| Standard work temperature: | -40C~+105C |
| Size: | L×W×H: 88×71×30mm |
| Weight: | 420g |
Salt-Fog, Anti-Vibration, and Water Proof This Kit Includes: - Two H4/9003 Bi-Xenon HID Bulbs
- Two 35w HID Ballasts
- Bi-Xenon Relay Harness
- All Necessary Wiring
- Mounting Hardware
- Installation Booklet
- One-Year Warranty
For the newer model vehicles, the vehicle’s computer may not be compatible with aftermarket HID system, The xenon bulbs may starts flickering and result with an “error/warning message” appears on the computer dash board (results may vary). You can fix this problem by adding/installing the “Warning Canceller” which we sell them also.
